▼

Sunday, November 15, 2026

When might a patient consider surgical revision for a failed arthroplasty, and when might they consider living with it?

In brief

In Kenny Rogers’s song “The Gambler” (see the video here), an old card player’s advice is that winning depends less on the cards you are dealt than on knowing which hands to keep playing, which to give up on, when to leave the table, and when to get out fast.

Patients and surgeons faced with an unsatisfactory shoulder replacement have the same kinds of choices. Some patients choose to accept a failed arthroplasty rather than undergo another operation with its share of uncertain outcomes. Others accept this uncertainty and decide to proceed with revision. In discussing the pros and cons of nonoperative and operative care, surgeons have the responsibility of sharing what they know from the literature and from their own experience. Here is some of the evidence bearing on that discussion.

Revision can help, but typically less than the first operation did. In 1,030 revisions from one large practice, the ASES score (0 to 100) rose on average from 33 to 58 out of 100 [1]. In 320 revisions to a reverse total shoulder from the same practice, only about half of the patients reached an acceptable symptom state at one year, and about one in five needed yet another revision [2]. Compared with patients after a primary reverse, patients after a revision have more pain, less motion, lower satisfaction and more complications [3, 4].

The type of failure matters. Gains in patient-reported outcome were largest, about 30 points, for a worn glenoid after a hemiarthroplasty, a loose glenoid or rotator cuff failure after an anatomic total shoulder, and a failed baseplate of a reverse. They were smaller for instability (20 points), and smallest for a loose humeral stem (10 points, with one in three revised again) and a fracture around the implant (8 points) [1]. Revising a failed reverse does worse than revising other types of shoulder arthroplasty: one in three needed another revision [2]. 

Revision deserves consideration when:

·       a patient’s loss of comfort and function can be related to a mechanical problem that surgery can effectively address. For example, conversion to a reverse total shoulder is often effective for an anatomic arthroplasty with symptomatic glenoid bone, glenoid component or rotator cuff failure; in these cases the results approach those of a primary reverse [5, 6].

Revision may also deserve consideration when:

·       a patient’s loss of comfort and function can be related to a mechanical problem that surgery may address, but with less certain chances of success, such as major glenoid or humeral bone loss or disabling instability [7, 8].

Nonoperative management is often the better choice when:

·       the patient’s pain has no identified cause;

·       the main complaint is limited rotation, which revision does not reliably restore [5, 6];

·       the problem is an acromial or scapular spine stress fracture: internal fixation may help these fractures heal, but it has not been shown to give better function than treatment without surgery, and fixation has its own complications [9-11];

·       the shoulder has already been revised, because each further revision is less likely to succeed [2, 12];

·       the patient’s medical risk is high.

Many patients have chosen to live with an unsatisfactory arthroplasty. In one review, about one in four reverse shoulders had a complication but only one in ten was revised [13]. In a larger review of modern designs, a third of postoperative humeral fractures and about a quarter of dislocations were managed without revising the components [14]. In the national registry for England and Wales, 27 percent of patients with a reverse had an unsatisfactory shoulder score, but fewer than 5 percent of them were revised [15].

Who should do the revision? Because the decision to revise is tricky and a good result is harder to achieve than after a primary, the choice of surgeon matters: as always, the surgeon is the method. But that choice is confounded by distance and economics. Traveling to a distant, high-volume, experienced revision surgeon costs the patient money and time and gives up the convenience of in-person follow-up; furthermore, referring the patient away costs the local surgeon revenue. The published results of one of the largest revision practices are similar to those of multi-surgeon health systems, national registries and other centers [1, 2, 12, 16], so there is no evidence that only a handful of surgeons can do revisions well, but logic suggests that a complex revision may fare best in the hands of a surgeon with substantial revision experience. The most useful information is a surgeon’s own record: the patient may ask how many revisions they do, how many of their patients are satisfied, and how many need yet another operation [17].

The time a surgeon and patient spend weighing a revision should be proportional to how likely and how serious its adverse outcomes are. After revision, about half of patients do not reach an acceptable result, a quarter to a third have a complication, and one in eight to one in three need yet another operation [2, 5, 18]. The risks, which include persistent pain, instability, infection, loosening and fracture, deserve a longer, more specific discussion than before a primary arthroplasty, with the option of living with the shoulder included in the discussion as well.

Five questions for the patient and surgeon: Is the problem bad enough to justify another operation? Do we know why it failed? Can that cause be reliably fixed? Will giving more time and rehab make it worse? Does the patient understand and accept the odds: that only half of revised shoulders reach an acceptable result and about one in five needs another operation?

The bottom line. A patient might reasonably choose revision when the shoulder problem significantly limits their life, its mechanical cause has been identified, and that cause is one that revision has a good chance of fixing. A comfortable shoulder with a worrying x-ray, pain without a cause, or stiffness alone usually tips the other way. The decision belongs to the patient, made with realistic expectations and, ideally, with a surgeon experienced in revision surgery. Like the gambler’s, the best play comes from reading the hand honestly.

The best way to avoid this decision is a primary arthroplasty that doesn’t fail. Each failure we study carefully teaches us how to do the next primary better [19, 20].

In detail

Results by the reason for revision

Reason for revision

ASES before

ASES after

Gain

Needed another revision

Glenoid loosening with cuff failure (anatomic total)

29

64

35

11%

Worn glenoid (hemiarthroplasty)

29

63

34

8%

Baseplate failure (reverse)

32

63

31

13%

Glenoid loosening (anatomic total)

31

59

29

13%

Rotator cuff failure (anatomic total or hemiarthroplasty)

34

62

28

12%

Instability (any implant)

32

52

20

17%

Infection (any implant)

35

52

17

26%

Humeral loosening (any implant)

37

47

10

33%

Periprosthetic fracture (any implant)

30

38

8

0%

From Kolakowski et al. [1]: 1,030 revisions in 859 patients by one surgeon, 2002 to 2022. Scores are from the 439 patients (51 percent) with at least one year of follow-up; patients who needed another revision were not included in the scores, so the gains are probably overstated.

Results by the type of implant that failed

 

Failed hemiarthroplasty (111)

Failed anatomic total (120)

Failed reverse (89)

Main reasons for revision

Rotator cuff failure 68%, glenoid wear 23%

Rotator cuff failure 50%, glenoid loosening 44%

Instability 44%, baseplate failure 34%, humeral loosening 19%

Needed another revision

13.5%

11.7%

32.6%

Implant survival at 10 years

74%

82%

60%

ASES score at 1 year

63

64

53

Reached an acceptable symptom state

53%

53%

37%

Satisfaction at 1 year (of 10)

7.4

7.9

6.8

From Patel et al. [2]: 320 first-time revisions to a reverse for mechanical failure, from the same practice. The acceptable symptom state was defined as an ASES score of at least 63.5 at one year.

Of the 58 shoulders that needed a second revision, 17 (29 percent) needed a third. Other reports agree that revising a failed reverse is the hardest case: a review of 355 such revisions found complications in 32 percent and re-revision in 27 percent [18], and the Australian registry found a 24 percent rate of second revision at 8 years [16]. Not every series agrees. A German study of 101 revision reverses found 85 percent survival at 10 years, with no difference by the type of implant that had failed [21].

When is revision likely to help?

No study has randomly assigned patients with a failed shoulder to revision or to living with it, but studies that scored patients before and after revision show where the gains are most likely.

Rotator cuff failure or a worn or loose glenoid. Converting a failed hemiarthroplasty or anatomic total shoulder to a reverse restores elevation. In a review of 1,041 such revisions, the ASES score improved from 33 to 62, pain from 6.7 to 2.7 (of 10) and forward elevation from 59 to 108 degrees, with reoperation in 12.5 percent [5]. Compared with a primary reverse, results are somewhat worse: in one registry study, 72 percent of revised patients said they were better, compared with 95 percent after a primary [3]. A matched study found no improvement in rotation, baseplate loosening in 21 percent, and a 19-point lower ASES score when the old humeral stem was retained [6]. For a loose glenoid component, 72 percent of patients reached a minimal clinically important improvement in one series [22]; every revision strategy carries a reoperation rate of about 20 percent, but satisfaction is highest after conversion to a reverse (86 percent) [23], and results are worse when the shoulder is also unstable [24].

A failed reverse. Revision for a failed baseplate gained 31 points [1]. Otherwise, gains are real but smaller than after revising other implants. In 33 failed reverses revised to a new reverse, pain fell from 6.5 to 2.0 and the ASES score rose from 31 to 68, but patients rated their shoulders at only 51 percent of normal, and 30 percent needed another operation [25]. In 52 others, complications occurred in 31 percent [4]. Results after revision for a loose humeral stem are the least predictable, with re-revision in 29 percent and a mean ASES score of 52 [26], although one smaller study found better results [27].

An unstable reverse. Here living with it rarely works: closed reduction avoids further surgery in only 29 percent of cases, and after a first revision 78 percent of shoulders are stable [7]. Stability can usually be achieved in the end (89 percent in one series), but it took an average of 3 operations after a failed primary reverse and 4.5 after a failed revision, and revising both the humeral and glenoid sides left fewer shoulders unstable (10 vs. 33 percent) than revising one side [8].

When might living with it be the better choice?

Many complications are never revised. In a review of 782 reverse total shoulders, 24 percent of patients had a complication, but only 10 percent had a revision [13]. In modern designs, each structural complication affects a few percent of patients [14, 28], yet a third of postoperative humeral fractures and about a quarter of dislocations were managed without revising the components [14]. The clearest evidence comes from the National Joint Registry for England and Wales: 27 percent of patients with a reverse had an unsatisfactory Oxford Shoulder Score, yet only 4.9 percent of these were revised, compared with 10.6 percent of unsatisfactory anatomic total shoulders and 13.9 percent of unsatisfactory hemiarthroplasties [15]. The authors suggest that older patients may accept a poorly functioning shoulder and that surgeons may be reluctant to undertake difficult revisions in high-risk patients. A low revision rate does not mean the shoulder succeeded.


Unsatisfactory patient-reported results compared with structural complications that are potential indications for revision after reverse total shoulder arthroplasty. The figures come from different cohorts with different denominators [14, 15, 28].

Acromial and scapular spine stress fractures. Most of these fractures, 88 to 94 percent, are managed without surgery [29, 30]. Fixation heals more of them, about 80 to 90 percent compared with about 45 percent without surgery [10, 11, 29], although one series reported healing in only 40 percent of acromial and 33 percent of scapular spine fractures after fixation [29]. Healing does not reliably bring a better result. In one series of 30 fractures, the 23 treated without surgery improved more (Constant score 35 to 61) than the 7 treated with fixation (32 to 45) [9]. Patients with these fractures do worse than patients without them, whether or not the fracture heals or is fixed: in a matched comparison, their ASES scores were 64 vs. 88 [10, 31, 32]. Fixation is difficult because the deltoid pulls the fragments apart and the bone is thin, and in a review of 18 fixed fractures, 5 had complications [11]. With nonoperative care, angulation of about 36 degrees or more or displacement of about 10 mm or more predicted unacceptable pain and function, which may help identify patients for whom fixation is worth its risks [33]. Revising the implant does not treat the fracture.

Pain without a clear cause, and limited rotation. Once infection has been evaluated, unexplained pain is a weak reason for revision: if we don’t know why the shoulder hurts, we can’t be confident that another operation will fix it. Revision to a reverse improves elevation, not rotation; external rotation barely changed (20 to 26 degrees) in pooled data [5].

Who should do the revision?

Published results describe what particular surgeons achieved with their particular patients; they do not transfer to another surgeon using the same implant. The two Tampa studies come from one of the largest revision practices in the country, averaging 52 revisions a year [1]. Their re-revision rates, 15 percent overall [1] and 18 percent at about 4 years after revision to a reverse [2], are similar to those of Kaiser Permanente’s multi-surgeon system (13 percent at 3 years and 19 percent at 7) [12] and the Australian registry (20 to 24 percent at 8 years) [16]. After revision of a failed reverse, the Tampa rates (21 and 33 percent) bracket those of a pooled review (27 percent) [18] and another academic center (30 percent) [25].

These comparisons cannot settle the question. A referral practice probably treats the hardest cases, so matching others’ results may reflect better surgery; a surgeon who revises readily will record more re-revisions than one who accepts poor results [15]; and patients lost to follow-up or revised elsewhere are missed. The only direct evidence on experience comes from Kaiser Permanente: after a failed reverse, surgeons who had done 4 to 11 previous revisions had a much lower risk of re-revision than those who had done fewer than 4, but surgeons who had done more than 11 did not differ significantly [12].

Distance and economics. Consider a patient in Seattle whose reverse has failed. Having the revision done by a high-volume surgeon in Tampa costs the patient money and time, may fall outside their insurance network, and gives up convenient in-person follow-up; if a complication arises after the patient returns home, a local surgeon who did not do the operation must manage it. Referring the patient away costs the Seattle surgeon revenue, a conflict of interest the patient should recognize, just as a distant expert has an interest in attracting referrals. The surgeon who did the original operation knows the shoulder’s history but may find it hard to be objective about why it failed.

A practical approach:

·       Get a second opinion before committing to revision; this can often be done by sending images and records.

·       Ask any surgeon being considered how many revisions they do each year, what proportion of their revision patients are satisfied, and how many need another operation.

·       Make sure the surgeon evaluates infection before and during surgery and has the full range of revision options available, including bone grafting, allograft-prosthetic composites and custom glenoid components.

·       Plan follow-up before surgery: who will see the patient, and who will manage a complication, after they return home.

·       For a more straightforward revision, such as converting a failed anatomic total shoulder with rotator cuff failure to a reverse, an experienced local revision surgeon is often a sensible choice; for a complex failure, such as a failed reverse with major bone loss or recurrent instability, the case for traveling to a surgeon who does many such operations is stronger.

Adverse outcomes to discuss before revision

Informed consent should be proportional to risk. The patient should hear, in numbers rather than words like “rare”, how often each adverse outcome occurs after a revision like theirs, and what it would mean for them. More than one visit, the presence of family members, and a written summary all help.

Adverse outcome after revision

How often

What it may mean

Not reaching an acceptable result (persistent pain or poor function)

About half of patients [2]

A shoulder that is better than before but still limiting

Any complication

23 to 35 percent [4-6, 18]

Further treatment, often surgery

Another revision

12 to 33 percent, highest after a failed reverse [1, 2, 18]

Each further revision is less likely to succeed

Instability or dislocation

The leading cause of re-revision (28 percent of re-revisions) [18]

Closed reduction or more surgery, sometimes several operations

Baseplate loosening

10 percent after a revision reverse vs. 1.2 percent after a primary [34]; 21 percent after converting a failed anatomic total [6]

Pain, loss of function, revision with bone grafting

Infection

4 percent needed revision for infection [2]; 15 percent of revisions for a loose glenoid had positive cultures [23]

Antibiotics, often more surgery, sometimes a staged revision

Humeral loosening or periprosthetic fracture

About 4 and 2 percent needed revision [2]

Complex reconstruction, with poorer results

Acromial or scapular spine fracture

About 2 to 3 percent after reverse arthroplasty [14, 31]

Usually treated without surgery; fewer than half heal without surgery, and function is often reduced

Approximate rates from the studies discussed in this post. The risk for an individual patient depends on what failed, the bone available, prior surgery and the patient’s health.

Questions about the evidence

How much did patients improve? Patel et al. reported no preoperative scores. The companion study did, but only half of its patients had a year of follow-up and those who needed another revision were left out of the scores [1].

Is implant survival the same as success? Survivorship counts only further operations, so a patient with a poor result who declines another surgery counts as a success. Asking each patient whether they are satisfied and whether the shoulder is better, the same or worse would tell us more [17].

Who was missed? In Patel’s study, only 69 percent of eligible patients had adequate follow-up, and revisions performed elsewhere were not captured, so the true re-revision rate is probably higher.

Does the infection exclusion fit real decisions? Patel et al. excluded 182 of 646 first-time revisions (28 percent) because cultures or pathology showed infection. A patient deciding whether to have a revision cannot know that in advance.

Can thresholds be compared across groups? Some studies calculate a separate “minimal clinically important difference” for each subgroup. In one, the threshold for revised reverses was below zero, so 90 percent of them “achieved” it [22]. Percentages based on different thresholds should not be compared, and Patel et al. misquote these figures in their discussion.

Other details. Patel et al. did not analyze results by the reason for revision, and in the companion study the differences between reasons were not statistically significant [1]. The mean time to a second revision is reported inconsistently (24.9 months in Table I and 42.0 months in the text). Patel’s study was funded by Enovis, and the senior author receives royalties and consulting fees from the company.

The author of this post has no financial relationship with any orthopaedic company.

Follow on twitter: https://twitter.com/shoulderarth

Follow on facebook: https://www.facebook.com/frederick.matsen

Follow on LinkedIn: https://www.linkedin.com/in/rick-matsen-88b1a8133/

References

1.         Kolakowski L, Stadecker M, Kucharik M, et al. Trends in 1030 revision shoulder arthroplasty cases: changing rates, indications, and treatments. J Shoulder Elbow Surg. 2026;35:1434-43. doi:10.1016/j.jse.2025.11.023

2.         Patel R, Kucharik MP, Schmidt CM II, et al. Revision reverse shoulder arthroplasty after failed shoulder arthroplasty: long-term survivorship and risk factors for failure. J Shoulder Elbow Surg. 2026;35:2346-53. doi:10.1016/j.jse.2026.04.028

3.         Tobin JG, Thomas SK, Elwell JA, et al. Anatomic total shoulder arthroplasty revised to reverse total shoulder arthroplasty: clinical and radiographic outcomes compared to primary reverse total shoulder arthroplasty. J Shoulder Elbow Surg. 2025;34:1525-31. doi:10.1016/j.jse.2024.09.019

4.         Tobin JG, Guareschi ME, Elwell JA, et al. Revision reverse total shoulder arthroplasty: clinical and radiographic outcomes compared to primary reverse total shoulder arthroplasty. J Shoulder Elbow Surg. 2026;35:1890-5. doi:10.1016/j.jse.2026.01.020

5.         Welch JM, Bethell MA, Meyer AM, et al. Outcomes and complications of revision reverse shoulder arthroplasty after failed primary anatomic shoulder arthroplasty or hemiarthroplasty: a systematic review. J Shoulder Elbow Surg. 2024;33:2306-13. doi:10.1016/j.jse.2024.03.053

6.         Hao KA, Simcox TG, Hones KM, et al. Conversion of failed anatomic total shoulder arthroplasty to reverse shoulder arthroplasty yields similar pain and functional outcomes to primary reverse shoulder arthroplasty but has a higher baseplate failure rate: a matched cohort study. J Am Acad Orthop Surg. 2025;33:e1215-25. doi:10.5435/JAAOS-D-24-01296

7.         Howard WH, Robinson LT, Vasimalla M, Faulkner H, Yeoh T, Low AK. Instability after reverse shoulder arthroplasty: a systematic review of interventions and clinical outcomes. J Shoulder Elbow Surg. 2025;34:2735-45. doi:10.1016/j.jse.2025.02.059

8.        Melbourne C, Munassi SD, Ayala G, et al. Revision for instability following reverse total shoulder arthroplasty: outcomes and risk factors for failure. J Shoulder Elbow Surg. 2023;32:S46-52. doi:10.1016/j.jse.2023.01.023

9.         Schenk P, Aichmair A, Beeler S, Jentzsch T, Gerber C. Clinical results of conservative versus operative treatment of acromial and scapular spine fractures following reverse total shoulder arthroplasty. J Shoulder Elbow Surg. 2022;31:2076-81. doi:10.1016/j.jse.2022.03.005

10.      Kriechling P, Hodel S, Paszicsnyek A, et al. Incidence, radiographic predictors, and clinical outcome of acromial stress reaction and acromial fractures in reverse total shoulder arthroplasty. J Shoulder Elbow Surg. 2022;31:1143-53. doi:10.1016/j.jse.2021.11.012

11.       Cassidy JT, Paszicsnyek A, Ernstbrunner L, Ek ET. Acromial and scapular spine fractures following reverse total shoulder arthroplasty: a systematic review of fixation constructs and techniques. J Clin Med. 2022;11:7025. doi:10.3390/jcm11237025

12.      Dillon MT, Prentice HA, Burfeind WE, Singh A. Risk factors for re-revision surgery in shoulder arthroplasty. J Am Acad Orthop Surg. 2020;28:e1049-58. doi:10.5435/JAAOS-D-19-00635

13.      Zumstein MA, Pinedo M, Old J, Boileau P. Problems, complications, reoperations, and revisions in reverse total shoulder arthroplasty: a systematic review. J Shoulder Elbow Surg. 2011;20:146-57. doi:10.1016/j.jse.2010.08.001

14.      Shah SS, Roche AM, Sullivan SW, et al. The modern reverse shoulder arthroplasty and an updated systematic review for each complication: part II. JSES Int. 2021;5:121-37. doi:10.1016/j.jseint.2020.07.018

15.       O’Malley O, Davies A, Rangan A, Sabharwal S, Reilly P. Is there a difference in thresholds for revision between shoulder arthroplasty types? A National Joint Registry study. PLoS One. 2025;20:e0330975. doi:10.1371/journal.pone.0330975

16.      Gill DRJ, Page RS, Graves SE, Rainbird S, Hatton A. The rate of 2nd revision for shoulder arthroplasty as analyzed by the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR). Acta Orthop. 2021;92:258-63. doi:10.1080/17453674.2020.1871559

17.       Matsen FA 3rd. How do our surgical patients do in the long term? A critical but difficult question. Shoulder Arthritis Blog. November 11, 2026. https://shoulderarthritis.blogspot.com/2026/11/long-term-followup-of-our-patients.html

18.      Wu L, Al-Asadi M, Abdel Khalik H, et al. Revision of reverse total shoulder arthroplasty: a scoping review of indications for revision, and revision outcomes, complications, and rerevisions. J Shoulder Elbow Surg. 2025;34:2645-54. doi:10.1016/j.jse.2025.02.039

19.      Menendez ME, Matsen FA 3rd. Learning from surgical failures. J Bone Joint Surg Am. 2026;108:547-8. doi:10.2106/JBJS.25.01110

20.      Hackett DJ, Hsu JE, Matsen FA 3rd. Primary shoulder hemiarthroplasty: what can be learned from 359 cases that were surgically revised? Clin Orthop Relat Res. 2018;476:1031-40. doi:10.1007/s11999.0000000000000167

21.      Trefzer R, Leisner M, Weishorn J, et al. Long-term results and implant survival of revision reverse shoulder arthroplasty after a mean follow-up of ten years. Bone Joint J. 2025;107-B:1212-9.

22.      Hao KA, Hones KM, O’Keefe DS, et al. Quantifying success after first revision reverse total shoulder arthroplasty: the minimal clinically important difference, substantial clinical benefit, and patient acceptable symptomatic state. J Shoulder Elbow Surg. 2023;32:e516-27. doi:10.1016/j.jse.2023.03.032

23.      Sharareh B, Yao JJ, Matsen FA 3rd, Hsu JE. What is the optimal management of a loose glenoid component after anatomic total shoulder arthroplasty: a systematic review. J Shoulder Elbow Surg. 2023;32:653-61. doi:10.1016/j.jse.2022.10.006

24.      Aibinder WR, Schoch B, Schleck C, Sperling JW, Cofield RH. Revisions for aseptic glenoid component loosening after anatomic shoulder arthroplasty. J Shoulder Elbow Surg. 2017;26:443-9. doi:10.1016/j.jse.2016.08.009

25.      Olson JJ, Granger CJ, Hill JR, Aleem AW, Keener JD, Zmistowski BM. Revision of failed reverse total shoulder arthroplasty with reverse: short-term clinical outcomes. J Shoulder Elbow Surg. 2024;33:908-15. doi:10.1016/j.jse.2023.07.030

26.      Layuno-Matos JG, Hutchinson A, Karadimas T, Frankle MA. Revision for humeral stem loosening: a systematic review. J Shoulder Elbow Surg. 2025;34:1313-21. doi:10.1016/j.jse.2024.08.053

27.      Hao KA, Boschert EN, O’Keefe DS, et al. Comparison of clinical outcomes of revision reverse total shoulder arthroplasty for failed primary anatomic vs. reverse shoulder arthroplasty. JSES Int. 2023;7:257-63. doi:10.1016/j.jseint.2022.11.003

28.      Shah SS, Gaal BT, Roche AM, et al. The modern reverse shoulder arthroplasty and an updated systematic review for each complication: part I. JSES Int. 2020;4:929-43. doi:10.1016/j.jseint.2020.07.017

29.      Brusalis CM, Taylor SA. Periprosthetic fractures in reverse total shoulder arthroplasty: current concepts and advances in management. Curr Rev Musculoskelet Med. 2020;13:509-19. doi:10.1007/s12178-020-09654-8

30.      Marigi EM, Eboh S, Marigi IM, et al. Acromial and scapular fractures after reverse shoulder arthroplasty: comparison of 3018 reverse total shoulders by inlay and onlay humeral component design. J Shoulder Elbow Surg. Published online 2025. doi:10.1016/j.jse.2024.09.029

31.      Routman HD, Simovitch RW, Wright TW, et al. Acromial and scapular fractures after reverse total shoulder arthroplasty with a medialized glenoid and lateralized humeral implant: an analysis of outcomes and risk factors. J Bone Joint Surg Am. 2020. doi:10.2106/JBJS.19.00724

32.      Moore JW, Reis R, Welsh ME, Rogalski BL, Friedman RJ, Eichinger JK. Acromion and scapular spine fractures following reverse total shoulder arthroplasty: operative versus nonoperative management. Semin Arthroplasty JSES. Published online 2025. doi:10.1053/j.sart.2025.03.001

33.      Rhee SM, Kantanavar R, Woo CW, et al. Acromial and scapular spine fractures following reverse total shoulder arthroplasty: treatment dilemma and radiographic prognosticators for enhanced clinical outcomes. A multicenter study. J Shoulder Elbow Surg. Published online 2025. doi:10.1016/j.jse.2025.05.005

34.      Bitzer A, Rojas J, Patten IS, Joseph J, McFarland EG. Incidence and risk factors for aseptic baseplate loosening of reverse total shoulder arthroplasty. J Shoulder Elbow Surg. 2018;27:2145-52. doi:10.1016/j.jse.2018.05.034