Showing posts with label bone resorption. Show all posts
Showing posts with label bone resorption. Show all posts

Monday, July 31, 2017

Short humeral stems - preliminary results of interest

A Short and Convertible Humeral Stem for Shoulder Arthroplasty: Preliminary Results

In their introduction, these authors point out that the humeral component is rarely the cause of the failure. However when performing a revision the humeral component may need to be removed  to allow glenoid exposure or to convert the prosthesis to a reverse total shoulder (RSA). Furthermore, "removal of a well-fixed, cemented humeral component is challenging, with high risk of complications such as intraoperative fracture." They state that "the results of the preliminary generation of this new stem have already been reported, with high rate of radiolucencies. Proximal plasma spray was secondary associated to improve metaphyseal bone fixation."



They reviewed 66 primary shoulder arthroplasties (42 anatomic total shoulders (TSA) and 24 reversed total shoulders) using a short convertible humeral stem with an average follow-up of 25.6 months (24–30.8 months).

Constant scores and range of motion improved. They reported no mechanical complication or loosening was reported. Twenty patients had proximal medial cortical bone thinning (30.3%) on the last follow-up X-rays. This occurred for 13 TSA (30.9%) and 7 RSA (29.2%). This cortical osteolysis was first seen at 1-year follow-up.  This bone resorption was only reported for women and uncemented stems. An example is shown below.



They correlated osteolysis with the 'filling ratio'.

Mean filling ratios were 0.57 for TSA and 0.62 for RSA. Bone resorption was associated with higher filling ratio than prosthesis without bone resorption.






In 8 cases, cemented stems were used, they did not find any proximal cortical bone thinning with cemented stems.

There were 7 complications (10.6%) and 2 revisions (3.0%). For the anatomical prostheses there were 3 calcar cracks, 1 hematoma, and 1 unexplained painful shoulder. For the reverse total shoulder there was 1 postoperative scapular spine fracture and 1 plexus palsy associated with excessive arm lengthening.

Seventeen of the total shoulders (40.5%) showed radiolucent lines around the glenoid component for the anatomic total shoulders.  Twelve of  these were observed on immediate postoperative X-rays, 3 were seen to be progressive. Five appeared after the immediate postoperative X-rays.  No radiolucent lines around the glenoid component were seen for the reverse total shoulders.

Comment: This candid presentation of the preliminary results with a second generation stem with proximal titanium plasma spray coating is informative. It points to the challenges of fixation when a short stem is used: cortical cracks on insertion and postoperative bone resorption, especially when the fit is tight (high filling ratio). At present it is not known how much the bone resorption will progress with time and what its consequences might be. It is also not known whether the bone ingrowth on one hand and the weakening from bone resorption on the other will create a fracture risk should the stem need to be removed at a subsequent revision.

As these authors have pointed out previously, lucent lines around the glenoid tend to progress with time.  It will be of interest to learn of the longer term radiographic and clinical survivorship of these components. 

The interested reader is invited to visit these links


and

Humeral stems - when should I buy a convertible?

=====

The reader may also be interested in these posts:





Information about shoulder exercises can be found at this link.

Use the "Search" box to the right to find other topics of interest to you.

You may be interested in some of our most visited web pages including:shoulder arthritis, total shoulder, ream and runreverse total shoulderCTA arthroplasty, and rotator cuff surgery as well as the 'ream and run essentials'




Monday, September 22, 2014

Resurfacing humeral arthroplasty can cause bone loss beneath the component

Stress-shielding induced bone remodelling in cementless shoulder resurfacing arthroplasty: A finite element analysis and in-vivo results

These authors explore the concern that cementless surface replacement arthroplasty may result in stress shielding and bone remodelling beneath the prosthesis. They studied bone remodelling using 3-dimensional finite element analysis (FEA) as well as evaluation of contact radiographs from human implant retrievals. 
FEA included one native humerus model with a normal and one with a reduced bone stock quality. The compressive strains were evaluated before and after virtual resurfacing prosthesis implantations.

They also studied the bone remodelling and stress-shielding pattern of 8 human cementless surface replacement arthroplasty retrievals.

FEA revealed for both bone stock models increased compressive strains at the stem and outer implant rim for both cementless surface replacement arthroplasty designs indicating an increased bone formation at those locations. Unloading of the bone was seen for both designs under the central implant shell indicating high bone resorption. Those effects appeared more pronounced for the reduced than for the normal bone stock model. 

These assumptions of the FEA were confirmed in the cementless surface replacement arthroplasty retrieval analysis which showed bone apposition at the outer implant rim and stems with highly reduced bone stock below the central implant shell. Overall, clear signs of stress shielding were observed for cementless surface replacement arthroplasty in the in-vitro FEA and human retrieval analysis. Especially beneath the central part of the cementless surface replacement arthroplasty the bone stock was highly resorbed. 

Comment: As pointed out in our post from two days ago, resurfacing humeral hemiarthroplasty has been proposed as a more conservative approach to managing shoulder arthritis, but it has the disadvantages of (1) non addressing the glenoid side of glenohumeral arthritis, (2) blocking access to the glenoid if a glenoid component is considered, and (3) making it difficult to detect if the humeral component is subsiding. This article adds 'stress shielding' and resulting loss of the supporting bone as a fourth concern.